Model

CS-151F1

CS-152F1

CS-150F1

Target of measurement

SC-1

(ammonia/hydrogen peroxide aqueous solution)

SC-2

(hydrochloric acid/hydrogen peroxide aqueous solution)

SPM

(sulfuric acid/hydrogen peroxide aqueous solution)

Multi-monitoring with one unit of up to 4 types of chemical solutions or ranges possible.

Measurement principle

Absorption spectrometry

Concentration computation principle

Temperature-compensated multivariate analysis

Measurement range

(mass %)

NH₃: 0.00% to 1.00%

H₂O₂: 0.00% to 5.00%

H₂O : 94.0% to 100.0%

HCI : 0.00% to 2.00%

H₂O₂: 0.00% to 2.00%

H₂O : 96.0% to 100.0%

H₂SO₄: 70.0% to 96.0%

H₂O₂: 0.00% to 10.00%

H₂O : 4.0% to 30.0%

Repeatability (mass %)

(within ±1% room temperature)

NH₃: ±0.15%

H₂O₂: ±0.30%

H₂O : ±1.5%

HCI : ±0.15%

H₂O₂: ±0.15 %

H₂O : ±1.5%

H₂SO₄: ±0.50%

H₂O₂: ±0.50%

H₂O : ±1.5%

Sample solution temperature

20 to 80 : (when using Inline cell)  20 to 30 : (when using cell unit)

Measurement cycle

Approx. 3 seconds

Content of

• 1st component: measured concentration value (%)

• Error code

LCD and input

• 2nd component: measured concentration value (%)

• 3nd component: measured concentration value (%)

• 1st and 2nd components: concentration alarm status

• Parallel concentration alarm output invalid status

• Serial/parallel status

• Background compensation data

RS-232C serial input

• Serial/parallel status switching

• Measurement data transfer request

• 1st and 2nd component concentration alarm setting

• Parallel concentration alarm output status

(valid/invalid)

• Target measurement solution switching

Parallel input

12 to 30 V DC (photocoupler insulated)

• Parallel concentration alarm output

• Target measurement solution switching

• Background compensation

Parallel output

Open collector output (photocoupler insulated)

Max. current when on:

DC 5 mA (no internal protection resistor)

Max. ignition voltage when off: 30 V DC

• 1st component concentration alarm, 4 types

• 2nd component concentration alarm, 4 types

• Device error

• Measuring

• Target measurement solution type

• Background compensation status

Solution temperature input

Terminal block connection (M3 terminal screws)
• Platinum resistance temperature sensor: Pt100 (Pt100 sensor should be prepared by customers)

Analog output

• 1st component concentration alarm, 4 types: 4 to 20 mA

• 2nd component concentration alarm, 4 types: 4 to 20 mA

* We also support other measurement ranges. Please specify when ordering.

Fiber optic cable

Dedicated CS-100F1 Series fiber optic cable

(25 ±15: installation temperature)

ample cell

We can supply dedicated sample cells (inline cell or cell unit) for various kinds of chemical solutions.

Power supply

100 V to 230 V AC (single phase) ±10%, 50/60 Hz, approx. 100 VA

Dimensions

205 (W) x 329 (D) x 269 (H) mm 8.1 (W) x 13.0 (D) x 10.6 (H) in (excluding protruding part)

Weight

Approx. 11 kg

Analog output

4 to 20 mA

(2 outputs: H₂SO₄: 50.0 to 100.0 %/H₂O: 0.00 to 10.00 %)

The analog output can be prepared to correspond to each

requirement by users. (Please specify when ordering.)

Power

24 V DC ±10%, 2 A

Dimensions

205 (W) x 329 (D) x 269 (H) mm

8.1 (W) x 13 (D) x 10.6 (H) in

291 (W) x 329 (D) x 269 (H) mm

11.5 (W) x 13 (D) x 10.6 (H) in

Mass

Approx. 11 kg

Approx. 12 kg

Connection pipe size

For inlet and outlet: Outer diameter 6 mm (inner diameter 4 mm)

Pipe connection

Nippon Pillar Super type